T-Series single-cylinder large cutting shears 
 Features: 
 Using standard large-diameter cylinder and the growth rate of the valve, to achieve a low noise, low vibration, high efficiency. 
 A hydraulic shear configuration exclusive automatic rotation mechanism 
 T-60A, T-120A, T-200A 
 A hydraulic shear without rotation with the pipe, using a special valve (patented) Auto rotation 
 A large cutting scissors-type auto-rotation body, the body built using special valves, hydraulic shears make a round trip using only the piping will be able to rotate, when only a foot valve can be! ! Open arms after all the work, continue to slam the pedal and hold valves, hydraulic shears will be switched to auto-rotation mode, the use of opening and closing the hydraulic oil cylinder to rotate. Release the foot valve, hydraulic shears to stop rotation. Of course, this also can be used as hydraulic shear traditional mechanical rotating hydraulic shear used. 
 Technical parameters: 
 T-Series single-cylinder large cutting shears (360 ° automatic hydraulic rotating one-way 
 Type the maximum length of the total weight of the blade length of opening width crushing force (kN) using hydraulic adapter Excavator Weight 
 (Kg) A (mm) B (mm) C (mm) tip (D) Central (E) MPa t 
 T-60A 720 1,670 600 100 392 568 26-29 6-8 
 T-120A 1,400 2,100 850 120 637 921 29-36 10-14 
 T-200A 2,170 2,410 1,000 160 911 1,294 29-36 20-22 
 Above are subject to change without notice 
 Technical parameters: 
 T-Series single-cylinder large cutting shears (360 ° two-way hydraulic rotation) 
 Type the maximum length of the total weight of the blade length of opening width crushing force (kN) using hydraulic adapter Excavator Weight 
 (Kg) A (mm) B (mm) C (mm) tip (D) Central (E) MPa t 
 T-60S 720 1,670 600 100 392 568 29 6-8 
 T-120S 1,390 2,100 850 120 637 921 36 10-14 
 T-200S 2,160 2,410 1,000 160 911 1,294 36 20-22 
 Above are subject to change without notice 
 Technical parameters: 
 T-Series single-cylinder large cutting shears (360 ° two-way mechanical rotation) 
 Type the maximum length of the total weight of the blade length of opening width crushing force (kN) using hydraulic adapter Excavator Weight 
 (Kg) A (mm) B (mm) C (mm) tip (D) Central (E) MPa t 
 T-60F 710 1,670 600 100 392 568 29 6-8 
 T-120F 1,370 2,100 850 120 637 921 36 10-14 
 T-200F 2,160 2,410 1,000 160 911 1,294 36 20-22 
 Contact: Lu college 13,475,792,219 
 Website 
 http://lvgaoxiao.b2b.youboy.com/ 
 Contact: Lu University (Sales Manager) 
 Tel: 0537-2351538 13475792219 
 QQ: 2421725592 Want zhongmei03014 
 E-mail: lvgaoxiao03014@163.com 
 Address: Torch Hi-tech Zone, Jining City Road East northbound S